The hand-cranked oil drum pump can be directly inserted into the material barrel (maximum suitable for steel drums in accordance with GB/325-1991 standard). The liquid in the extraction barrel can transport various oil materials, corrosive chemical water and other liquids. Depending on the nature of the liquid being transported, the wetted part of the pump body may be composed of aluminum alloy, cast iron or the like.
The hand-cranked oil drum pump can transport oil, beverage, water and other media, and is widely used in chemical, petrochemical, fine chemical, dye chemical, environmental protection, water treatment, medicine, food and other departments. At the same time, it is suitable for small and medium-sized oil fields, oil depots, oil refineries, gas stations, agricultural machinery stations, enterprises and institutions, fleets, vehicles and ships, etc. It is an ideal tool for conveying gasoline, kerosene, diesel oil and light fuel oil.
Main use：
1、Use specified voltage: The line voltage does not exceed ±10% of the voltage specified on the pumping pump nameplate.
2、How to equip: After unpacking, assemble according to the structure diagram, connect the motor (1) and connect the mobile phone (2) to make the pump body and motor integrated (3) Connect the water wheel tube
3、Before use, check that the parts are in good shape before starting up.
4、The pump should not be used for empty operation. When using, the pumping is completed, that is, the pump is stopped, otherwise the bearing of the impeller seal will be accelerated. It is also possible to wear the pump tube because the pump motor has a no-load speed of 10,000 rpm.
5、When the brush is replaced in time, if the brush is worn out, it must be replaced in time (2 brushes are exchanged at the same time). Otherwise, the contact between the brush and the commutator may cause ring damage, damage the commutator, and burn out when severely punished. Armature.
6、Do not use in the following cases. If the insulation damage is found during the use, the power cable sheath is broken, the plug and socket are cracked or the contact is bad, and the operation is interrupted. If there is a serious punishment for sparks, the motor casing should be operated immediately. Make repairs. Do not use until unrepaired.
7、To prevent overload, when using, if the speed is abnormal or reduced, stop it and check if there is any debris stuck in the impeller or the motor is faulty. The pump must cut off the power immediately when braking.
8、Use tools to cherish, all pumping pumps should be handled with care to avoid shocks.
lianghang Specializing in the production of electric pump, foot oiler, boutique grease gun, hand pump, Yangliu heavy grease gun and other products, welcome to inquire. Phone 0579-87285588
